|
| name |
Configuration |
Specifications |
Technical
standard |
| Door
and window frame |
A. Stand
to frame, + bend frame；B.
Former frame + back frame + Horizontal flame C. Overall
curved frame |
See " product section " |
Q/OQZ 01－93 |
| Door
chute |
A.
end curved type |
See " product section " |
Q/OQZ 01－93 |
| Glass
rail |
A. Two
connected support B. Single
connected support C. End
or lean connection |
See " product section " |
Q/OQZ 01－93 |
| Glass
bracket |
A. Bracket
＋ one connected board B. Bracket
＋ two connected board C. Bracket
＋ supporting rail |
See " product section " |
Q/OQZ 01－93 |
| Glass
chute |
A.
upper connected end without airtight B.
upper connected end with
airtight |
See " product section " |
Q/OQZ 01－93 |
| Gutter
channel |
A. Car
type B. Light vehicle
type C. Mini vehicle type |
See " product section " |
Q/OQZ 01－93 |
1.the size of
roller
typing material linear section do not note the extreme deviation of tolerance:：
| Basic
size(㎜) |
3 ～ 10 |
10 ～ 50 |
50 ～ 150 |
≥150 |
| Extreme
deviation |
±0.3 |
±0.4 |
±0.6 |
±0.7 |
2.the angle
of roller typing material
linear section do not note the extreme deviation of tolerance:：
| Basic
size(㎜) |
3 ～ 10 |
10 ～ 20 |
20 ～ 40 |
40 ～ 100 |
| Extreme
deviation |
±2° |
±1°40′ |
±1°20′ |
±1° |
3. the
curved radius R of roller
pressing do not note the extreme
deviation
a.It is ±30% of the
curved radius R that
the curved radius
R of roller pressing do not note the extreme deviation tolerance
b. the curved radius of
roller pressing do not be
smaller than material thickness
c. Nearby curved
radius,compressing
quantity of the thickness of steel must not exceed the 30% of thickness
While the roller presses shaping
4. The linearity of roller typing
material each metre of ≤ 1.0 ㎜
5. The twisted degree of roller
typing material each metre of ≤ 1 °
|
